We are back, folks, with the Puffco Proxy, all thanks to Diamond Glass LLC. Check out the link in the description below. We have the chamber storage location, the stash storage location that comes with the cable. Max, you could probably fit three containers. Let's get onto the main unit of the Proxy. You'll be able to charge via USBC, and it has one button to worry about, so it's like the OG Puffco. If you know that, then you know how to use it already. If you don't, we're going to walk through it right now.
To turn on your Puffco Proxy, hold down the button for about five seconds. Once it's turned on, you'll have five different heat profiles: blue, green, red, and white. To change heat profiles, it's one click of the button to start a heat profile, double-click that button. Moving on to the Puffco Proxy's chamber. It has a 3D chamber, which we'll discuss later on how to best maintain. But beyond maintenance, let's talk a little bit about how hard you're supposed to hit this thing. You're supposed to sip it, not hit it. If you hit it, you're going to end up having a lot of oil that spills out of your 3D chamber, and then from there, you're gonna have it all over the place which will be hard cleanup.
We're going to be doing right now to show you how to best clean and to save isopropyl alcohol so you're not running out and having to buy a whole bunch every time you want to do a cleaning. Scraping reclaim is optional, but it's always best to remove as much as you can so you don't have to waste as many Q-tips, as well as isopropyl alcohol. After you've removed as much reclaim as you can from the Proxy, you'll do a Q-tip swabbing with isopropyl alcohol. We'll be talking about Q-tip Tech later, but in general, make sure you get all of those nooks and crannies taken care of and you do your ISO swabbing with Q-tips as much as you can. If you don't clean up before you do your ISO soaking, all of your reclaim will end up in that isopropyl and will end up with a thin layer around your atomizer.
Now, when talking atomizers and comparing the Puffco Peak Pro chamber to the Puffco Proxy chamber, you can see that there's a size difference, so you're definitely going to want to use less wax when having sessions with your Puffco Proxy. Also, I think this is going to be a great move with the new connector pin on the bottom of the Proxy. So you will have less atomizer detection issues compared to the Puffco Peak Pro, which honestly has had so many issues. It's very hard for me to even recommend to somebody.
Once you've shaken up your glass, put it to the side, and let's get back to the atomizer and let it soak longer if you think you need to let it soak longer. Shake it up as much as you need to. Shake it. Once it's done been shaken up, you want to take it out and dry it. While your atomizer is drying, you'll want to swab your silicone tether jacket and an Oculus cap before soaking in isopropyl alcohol to avoid having any of that reclaimed film buildup. Now air drying is the cheapest way to dry your chamber, but we do use forced air on the channel mostly because we're trying to save time, make content, and not wait for the air dry to finish.
For your tether jacket and Oculus cap, make sure to air dry. Do not inhale isopropyl alcohol; it is bad for you. Now moving onto the travel pack of the Proxy. You get an Oculus cap as well as a ball cap. I don't recommend the ball cap for mobile usage, and we'll talk about that in a few moments.
The heady mops definitely reign supreme in this category because of the size difference. They are smaller, which allows you to Q-tip swab in nooks and crannies which you cannot access with those bigger glove mop Q-tips. I highly recommend you get some heady mops if you do want to get a Proxy.
Next, we're going to want to talk about the travel pack mobility issue, which is a huge issue when it comes to the Proxy case and the travel pack. It doesn't actually fit, and also the ball cap, which you get, will not fit and close your bag. Also, the mouthpiece in itself won't close either. So you have to travel stock if you do want to travel.
Next, we're talking terp pearls. We got a 2mm, 3mm, and 4mm terp pearl to compare between them, and I will recommend the 2mm because the chamber on the Proxy is much smaller. And even then, it's going to cause more oversplash than vapor created most of the time. That is why I'll also recommend the Oculus cap over the ball cap. Certain people might want more airflow, but generally, the more airflow you have, the more likely you are to have oversplash. So just my words of advice.
If you didn't follow my advice on how to install the chamber silicone jacket before you install your atomizer, there you go. Now we're pretty much ready to load up and pack a dab and enjoy one as we have almost finished this video.
As I've said, use the Oculus cap instead of the ball cap. That's because of the airflow velocity as well as the amount of spin. You want to have the terp pearl is optional. I would recommend a 2mm pearl if you're ever going to use a terp pearl.
Let's load up some of this rosin. Let's get ready for our dab off of this white truffle life rosin. This is an Oculus cap test. Cheers!
Also remember, now don't forget to train your Proxy battery. The way you do that is basically charge it up all the way, use it till the end of the battery is dead, then charge it up all the way and keep cycling it all the way to the bottom for about five or six charges. After that, your battery has been more calibrated. This is something you want to do with any lithium-ion battery for your phone. Just look it up. It's something all over the place. Lithium-ion is not something that is all that great. Hopefully, we'll get into graphene soon. But until then, don't forget to smash that like button, subscribe to the channel, or become a member to help support the work that we do on this channel. If you do like it, don't forget to throw a comment below on what you think is the best part about the Proxy ecosystem or what your favorite piece is. So thanks for checking out this video. Oh yeah, PS, I forgot to give a shout out to Diamond Glass LLC for giving us a great deal on this Puffco Proxy to be able to put together this video for a homie that is going to be receiving this piece because we're not going to be keeping it in the studio. But I thought I'd do a little video about it. So thanks again, Diamond Glass. Stay elevated and peace.
Q: What are the features of Puffco Proxy? A: The Puffco Proxy features chamber storage, stash storage with cable, USBC charging, and one-button operation. Q: How do you clean and maintain the Puffco Proxy? A: To clean the Puffco Proxy, hold down the button to turn it on, choose from five heat profiles, clean the 3D chamber, and avoid hitting it too hard to prevent oil spills. Q: How can you properly clean the Puffco Proxy atomizer and glass? A: Clean the Proxy atomizer using isopropyl alcohol and Q-tips to remove reclaim and maintain it properly to avoid build-up. Q: How does the Puffco Peak Pro compare to the Puffco Proxy? A: The Puffco Proxy has a smaller chamber than the Puffco Peak Pro, requires using less wax, and features a new connector pin for improved reliability. Q: What are some recommendations for using Puffco Proxy accessories? A: For Puffco Proxy accessories, air dry the tether jacket and Oculus cap, and avoid using the ball cap for mobile usage. Q: How can you enhance the vapor experience with Puffco Proxy using terp pearls and caps? A: Use 2mm terp pearls for the Puffco Proxy, choose the Oculus cap over the ball cap, and be cautious of oversplash due to airflow. Q: What are the optimal settings and cap selection for Puffco Proxy? A: Use the Oculus cap over the ball cap, consider using a 2mm terp pearl, and adjust airflow velocity for the best performance.
